Monobloc presence detectors

Apart from simple ON/OFF and daylight override light dimming provides more saving and comfort. The dimming can take place with dimmable Electronic Control Gear(ECG) with daylight sensing by the sensor. This provides more visual comfort and optimal light in the detection area and surroundings.

PIR switches ON a light as soon as the ambient light level is lower than a predefined lux level and human movement is detected in detection area. The lights are switched OFF after a preset duration, if no movements are detected and when the light level goes above the preset level. Apart from this the sensor is able to control dimmable ECG (DALI & DSI) connected to it and regulate light as per available daylight and lux level set by the user.
This range of presence sensors comes with remote controls which can be used for setting the sensors parameters as well as setting light scenes and recalling them.

References

EE815 – presence detector monobloc on/off
EE816 – presence detector monobloc DALI/DSI
EE807 – Installer remote control
EE808 – User remote control

Features & Benefits (EE815)

Compact design
Easy parameter setting using installer remote control.
Save energy and reduce the electricity bill by optimising the light switching cycles
It switches ON when presence is detected and light is needed
It switches OFF when there is enough light
Improves comfort by setting the lux level in premises according to the user's need and the ambient light conditions
Switch ON/OFF any equipment according to presence in a room.
The detector can trigger any Occupancy surveillance equipments
The occupancy information could be used to for alarm information

Additional Features & Benefits in EE816

Automatic control of the lighting according to the presence and the ambient luminosity.
Lux level is regulated
Push button input in order to change the set point.
24 nos DALI/DSI ballast can be regulated
3 modes for different applications
Settings via potentiometer